Aeg-Electrolux F77000M0P Manual do Utilizador

FAVORIT 77000ENDISHWASHER USER MANUAL

Option button Multitab Extra-HygienePress three times ACTIVATED ACTIVATEDPress four times DEACTIVATED DEACTIVATEDFunctionsMultitabIf you use the combi

SETTING THE WATER SOFTENERThe water softener removes minerals and salts from the water supply. These minerals andsalts can cause damage to the applian

3. Press and hold the Delay button and the Start button at the same time until the pro-gramme indicators AUTO, PRO and SILENT flash.4. Release the Del

USE OF DETERGENT AND RINSE AID2030MAX1234+-1234567Use of detergentTo help the environment, do not use more than the correct quantity of detergent.Obey

You can set the rinse aid dosage between position 1 (lowest dosage) and position 4 (highestdosage).Turn the rinse aid selector 4 to increase or decrea

• Mix the spoons with other cutlery to prevent them to bond together.• When you put the items in the baskets, make sure that the water can touch all s

Consumption valuesProgramme1)Energy (kWh) Water (litre)0,9 - 1,7 8 - 151,5 - 1,6 13 - 141,1 - 1,2 9 - 110,9 90,9 - 1,0 9 - 111,0 - 1,2 10 - 110,1 41)

• The delay indicator is on.6. Press the Start button, the countdown starts automatically.• The delay start time flashes no more in the display.• The

2. Open the appliance door.3. For better drying results, keep the appliance door ajar for some minutes.Remove the items from the baskets• Let the dish

7. Put the filter (B) to its initial position.Make sure that it assembles correctly inthe two guides (C).8. Put the filter (A) into position in filter

FOR PERFECT RESULTSThank you for choosing this AEG product. We havecreated it to give you impeccable performance for manyyears, with innovative techno

Malfunction Possible cause Possible solution The water inlet hose is dam-aged.Make sure that the water inlethose has no damages.The appliance does no

Problem Possible cause Possible solution The spray arms could not turnfreely. Incorrect position of theitems in the baskets.Make sure that an incorre

The rinse aid dispenser is off.The rinse aid dispenser is on.6. Press button Option to change the setting.7. Deactivate the appliance to confirm.TECHN

Make sure that the dimensions of the recessagree with the dimensions in the picture.How to remove the appliance worktop1. Remove the rear screws (1).2

• A stand pipe with vent-hole. The internal di-ameter must be minimum 4 cm.Remove the sink plug when the appliancedrains the water to prevent that the

25

26

27

www.aeg-electrolux.com/shop 117937570-B-312010

CONTENTS4 Safety information7 Product description8 Control panel10 Use of the appliance11 Setting the water softener12 Use of dishwasher salt13 Use of

SAFETY INFORMATIONBefore the installation and use, read this manual carefully:• For your safety and the safety of your property.• To help the environ

• Do not fill the rinse aid dispenser with other products than the rinse aid, (dishwashercleaning agent, liquid detergent). This can cause damage to t

– Do not put the water inlet hose or the safety valve in water.– If the water inlet hose or the safety valve are damaged, immediately disconnect thema

WARNING!The dishwasher detergents are dangerous and can cause corrosion !• If an accident occurs with these detergents, contact immediately a physicia

CONTROL PANEL134 5678921 On/off button2 Programme guide3 Program button4 Programme indicators5 Display6 Delay button7 Start button8 Indicators9 Option

IndicatorsDoor indicator. It comes on when the door is open or not closed correctly.1) When the salt container and/or the rinse aid dispenser are empt