
7Operating the appliance
Example: the heat setting 9 is selected on one
cooking zone. The power function is switched
on for the corresponding cooking zone. The
power function is carried out but the heat set-
ting 9 of one of the cooking zones and the
power function for the other cooking zone of
the pair exceed the maximum power for both
at the same time. For this purpose, the power management reduces the power of the
cooking zone that switched on first from 9 to example 5 and the display of this cooking
zone changes between 9 and 5 and then stays at the current possible maximum 5. (If the
display changes between 9 and 5 or 9 and 3 or another value depends on the type of
appliance and the size of the cooking zone.).
Using the child safety device
The child safety device prevents unintentional use of the appliance.
Automatic cut-out
Induction cooking zones
• When overheating occurs (e.g. if a pot has boiled dry) the cooking zone automatically
switches itself off. is shown. Before being used again, the cooking zone must be set
to .
• If unsuitable implements are used, lights up for two minutes in the display of the
cooking zone. Following this is displayed. If the setting of the ring switch is
changed while is lit, appears in the. display. Before being used again, the cook-
ing zone must be set to .
• If one of the cooking zones is not switched off after a certain time, or if the heat set-
ting is not modified, the relevant cooking zone switches off automatically. is dis-
played. Before being used again, the cooking zone must be set to .
Ring switch
To switch on Simultaneously briefly turn
ring switches 1 and 3 to
the left away from the zero
setting
appears in all 4 displays when
an attempt is made to switch on a
heat setting.
To switch off Repeat the action The child safety device is switched
off again. Each heat setting can be
switched on as normal for each
element.
Heat setting Switches off after
1 - 2 6 hours
3 - 4 5 hours
5 4 hours
6 - 9 1.5 hours
Comentários a estes Manuais